AX3000 WIFI-6 XGSPON ONU
(1*XGSPON, 1*2.5GbE+3*1GbE LAN, 1*FXS VoIP interface)

The GS2020XGS is an XGSPON optical terminal access device that is highly integrated with dual-frequency WiFi-6 (802.11ax 2T2R _ 3000Mbps). It is an end-product of optical fiber for operator, which supports ultra-bandwidth access through XGSPON upstream / downstream technology, and provides users with WIFI functions, routing, VOIP, and gigabit Ethernet functions. The GS2020XGS with XGSPON interface, 1*2.5Gbps+3*1Gbps LAN, 1*USB 3.0 interface (optional), 1*FXS VoIP interface, and AX3000 WiFi-6 WLAN interface.

Product Interface

  • 1 * XGSPON interface: SC/UPC or SC/APC interface, XGSPON standard compliance
  • 1 * 2.5GbE + 3*1GbE RJ45 Interface, IEEE802.3-2005 standard compliance
  • 1 * FXS VoIP interface, in accordance with G. 711 a/u, G. 729 a/b, G. 722 standard
  • 1 * Standard USB 3.0 interface (Optional)
  • 802.11ax Dual-band AX3000 WIFI-6 (2×2 MIMO, 2.4G+5GHz), with EasyMesh function supports

LED status

Uses front LED indicators to check the operation status of GS2020XGS. The front LED indicators will display the status of each interface, definition as below.

 

LEDColorIndicates
PWRGreen/SolidNormal
OFFNo power
LOSRedOptical link is NOT OK (range: out of -8~ -29dBm)
Green/FlashOptical link is OK (range: in -8~ -29dBm)
Green/SolidRegistered successful and active
InternetGreen/SolidThe WAN interface of the internet is configured
OFFThe Internet WAN interface is not configured or the Internet WAN interface is configured but does not take activate
LAN1/ LAN2/ LAN3/ LAN4Green/FlashDevice connected
Active or Link data receive and transfer (Green/flash)
OFFdevice not connected
link downn
VOIPGreenSuccessfully registered to softswitch
OFFNot be registered to softswitch
USB(optional)GreenConnected and data receive and transfer
OFFNo power/error/USB is not connected/USB disable
WIFIGreen/FlashThe terminal is connected to transmit data wirelessly
OFFNo power/WIFI disable
WPSGreenWPS started working
OFFWPS is not working

Product Interface

InterfaceDescription
1POWER12Vdc 1.5A, power input interface
2ON/OFFPower switch button
3RSTReset the ONT
4LAN1/LAN2/LAN3
LAN4
LAN1~LAN3
RJ-45 10/100/1000Mbps Base-T Ethernet port
LAN4
RJ-45 10/100/1000/2500Mbps Base-T Ethernet port
5VOIPRJ-11 FXS Interface
6PONXGSPON Interface
7WPSWPS switch button
8WIFIWIFI switch button

Software Specification

XGSPON / PON Feature

  •  ITU-T G.984.1, ITU-T G.984.2, ITU-T G.984.3, ITU-T G.984.4, TR255/TR156,ITU-T G.987.3, G.988, G.989
  • SC/UPC(APC) connector optional
  • FEC (Forward Error Correction) in both upstream and downstream
  •  Dynamic bandwidth status report
  • QoS scheduling based on SP or WRR between GEM port and T-CONT
  • Downstream multicast GEM port and broadcast GEM port
  • Support Triple Churning Encryption algorithm
  • Support NSR/SR Dynamic Bandwidth Allocation (DBA)
  • Support Forward Error Correction (FEC)
  •  Support Dying Gasp
  • Service processing functions such as traffic management, QoS, multicast, encryption and decryption, service flow classification, bridging, NAT/NAPT, gateway processing are provided;
  • Supports L2/L3 multicast and VLAN conversion;
  • Supports 16KB jumbo frames
  • 15 TCONTs /256GEM ports
  •  8 Egress queues per TCONT at least
  •  VLAN/ priority/VEIP gem mapping mode
  • SN/LOID/SN+ Password authentication Performance monitoring: eth/Gem
  • Dying gasp

Ethernet Feature

  • Ethernet port 10/100/1000M/2500bps auto-negotiation
  • Downstream Directions
  • L2, IPv4 NAT, IPv6 3/5-Tuplebridge
  • Virtual exchange based on TR-156 and CTC
  • Ethernet port-based VLAN tags and tag removal
  • Support IP TOS/DSCP to 802.1Pmapping
  • Support service classification based on UNI, VLAN-ID, 802.1Pbit,TOS/DSCP
  •  802.1P labeling and re-labeling
  •  IGMP v2 / v3snooping
  • Broadcast/multicast rate limit
  •  MAC learning (SVL)/aging
  •  Support max frame length to1518 bytes VLAN tagging for untagged packets Support VLAN 1-4094
  •  VLAN transparent/translation
  •  MAC Learning, 1K MAC address table
  • Port Bandwidth Control, IEEE802.3x flow control
  •  Storm Control: Broadcast/Multicast/unknown unicast, ARP
  •  Port Isolation, port Mirror, Auto MDI/MDIX
  • port Loop detection
  •  IGMP v2, v3 &IGMP Snooping

WIFI Feature

  • WIFI protocol: IEEE 802.11b/g/n/ac/ax
  • 2.4GHz band transmit power (including antenna gain) default 100mW, adjustable range 20-100MW, can be adjusted by percentage up to 100mW;
  • 5GHz band transmit power (including antenna gain) default 200mW, adjustable range 40-200mW, adjust table by percentage up to200mW;
  • Automatic rate regulation;
  • Recognize when the STA is in a power saving state, and cache relevant data, wake up the STA with a Beacon frame, and send the cached data;
  •  Optionally supports configuration of Beacon frame sending interval and DTIM interval;
  • Support dual-antenna MIMO (2*2) external 4pcs, antenna gain:5dBi;
  • 2.4G11n 2X2 with a transmit power of no more than100mW, and an open are a coverage of more than 100m. The actual access rate at 100m is not less than 10% of the WLAN throughput. and at least 10Mbps if 10% of the throughput is less than10Mbps;
  • 5G11ac 2X2 with a transmit power of no more than 200mW, and an open are a coverage of more than 100m. The actual access rate at 100m is not less than 10% of the WLAN throughput. And at least 10Mbps if 10% of the throughput is less than10Mbps;
  •  WLAN shall be able to penetrate one reinforced concrete wall or two ordinary brick walls (non-reinforced concrete), and the actual access rate shall not be less than 10% of the WLAN throughput. When the throughput is less than 10Mbps, it shall reach at least10Mbps.
  • 2.4G 573.5Mbps 5G 2401Mbps
  •  WLAN access capability: 64 client
  • channel: 2.4GHz(channel 1-13)/ 5GHz(channel 36-161 )
  • WPS: WLAN terminal devices with WPS Push Button function establish connection within 2 minutes
  • WLAN security function: WPA-PSK、WPA2-PSK、WPA3、WPA-PSK/WPA2-PSK
  • AES、AES+TKIP
  • Multicast: WMM(Wi-Fi Multi Media)
  • Support EasyMesh function, achieve high-speed wireless network coverage throughout the house.

VOIP Feature

  • Supports one voice processing;
  •  Support various prompt tone generation;
  •  Support encoding and decoding G.711A, G.711U, G.722, G.729,
  • SDP protocol (RFC 2327 and RFC 4566) T.30/T.38/G.711 fax mode
  • Support the FoIP function;
  • Support the Fax/Modem VBD (Voice Band Data) function;
  • Functions such as echo suppression, speech activity detection, comfortable background noise, speech frame compensation are supported;
  •  Support the functions of VoIP statistics and fault diagnosis;
  • VoIP codec mode can be configured separately for each POTS route, and codec priority order and packaging interval can be configured;
  •  Support the functions of detection, generation, transmission and recovery of DTMF;
  •  Generation of Support FSK with calling number display function;
  •  Support two-stage dialing and RFC2833 intra-band transmission of DTMF tone;
  •  Support the Tripartite meeting function;
  • Call waiting, In-conditional Call Forward,
  • Call Forward if Busy, Call Forward if no reply and Three-party calls.

Getaway Feature

  • Support LAN connection
  • DHCP
  • Static connection
  • Network Address Translation (NAT)/Network Address Port Translation(NAPT)
  • Port Forwarding
  • Static Routing
  • Traffic classification and QoS based on the identification of Layers 3 and4
  • Access Control List(ACL)
  •  Firewall
  • Application Layer Gateway(ALG),UPnP
  • DMZ
  •  Dynamic Domain Name Service(DDNS)
  • Support the NTP protocol
  •  IGMP agent

L2 Feature

  • MAC learning (SVL)/aging
  •  Support max frame length to 1518 bytes
  •  VLAN tagging for untagged packets
  •  Support VLAN 1-4094

L3 Feature

  •  PPPoE/Static IP/DHCP
  • NAT/NAPT
  • Port forwarding ALG, UPnP, DDNS
  •  IPv4/IPv6 dual stack, DS-Lite Static, and Default Routes
  •  Multiple services on one WAN port

QoS

  • Support 8 Queues with Strict Priority
  • Ethernet port rate limitation
  • 802.1 priority
  •  SP/WRP
  •  Service flow classification

Multicast

  • IGMP v2 (RFC 2236) and IGMP v3 (RFC 3376)
  •  IGMP snooping and IGMP Proxy
  • MLD v1

Management

  •  OMCI/WEB UI/TR069
  •  Telnet/SSH Management with CLI commands
  • Dual-system software backup and rollback

Hardware Specifications

Hardware SpecificationsDescription
Port1*SC/UPC or SC/APC XGSPON interface
1*2.5GbE+3*GbE LAN interface
1*FXS VOIP interface
1*USB3.0 interface (Optional)
802.11ax 2T2R AX3000 WIFI-6 interface
LEDPOWER, PON/LOS, INTERNET, LAN1~4, VOIP, WiFi, WPS, USB (Optional)
ButtonPOWER On/Off Switch, RESET (RST) button, WIFI On/Off button, WPS button
Flash & MemoryFlash: 128MB NAND; Memory: 512MB DDR4-RAM
Power Supply12Vdc 1.5A
Power Consumption≤18W
Environment StandardOperating Temperature: -5℃~45℃
Storage Temperature: -20℃~70℃
Relative Humidity: 5%~95% non-condensing
Weight0.35KG
Size190mm*135mm*33mm (L*W*H)
Module typeClass B+, SC/UPC
wavelengthUP 1270nm, Down 1577nm
TX Optical power4~9dbm
RX Optical sensitivity-28dBm
Transmission distance0~20km
Transmission rateXGSPON: Upstream 10Gbps/Downstream 10Gbps
LAN Interface typeLAN1~3 : RJ45 _ 10/100/1000Mbps
LAN4 : RJ45 _ 10/100/1000/25000Mbps
VOIPRJ11
USBUSB3.0 (Optional)
WIFI802.11ax Dual-band WIFI-6 AX3000 (2×2 MIMO, 2.4G+5GHz)

802.11ax WiFi-6 AX3000

WLAN Specifications
AttributesDescription
Protocol2.4GHz supports 802.11b/g/n/ax
5GHz supports 802.11a/n/ac/ax
Transmit Power2.4GHz 100mW, 5GHz 200mW
Antenna Gain5dBi
AntennaDual-antenna MIMO (2T2R, 2.4G+5GHz)
WLAN PenetrateOne reinforced concrete wall or two ordinary brick walls (non-reinforced concrete)
WLAN Access Capability64 concurrent WLAN clients / SSID
Channel2.4GHz supports channel# 1–13
5GHz supports channel# 36–161
WPSWLAN terminal devices with WPS Push-Trigger Button function, to establish WiFi connection within 2 minutes
WLAN Security FunctionWPA-PSK, WPA2-PSK, WPA3, WPA-PSK/WPA2-PSK, AES, AES+TKIP
Air Speed

573.5 Mbps (2.4GHz),

2401 Mbps (5GHz)

MulticastWMM (Wi-Fi Multi Media)