Data Sheet GSM6860

The GSM6860 is a medium-density chassis-type carrier-grade Optical Line Terminal (OLT) platform developed by GSI. With platform design, it can access EPON, GPON, 10G EPON, XGS-PON, XG(S)-PON Combo, leased line services, and other services, and can aggregate multiple types of services. The GSM6860 is equipped with high backplane bandwidth, high switching capacity, and non-blocking forwarding and high reliability for all services. With high access capacity, it can meet the carrier’s need for high-capacity with fewer offices. Cards and fans adopt green energy-saving design to lower power consumption and emissions. The GSM6860 is applicable for FTTx, HFC bidirectional transformation, IP leased line interconnections, and other access scenarios.
GSM6860

Screenshot 2025-02-16 175320

Application
xPON comprehensive access scheme

FTTH access

Provide video, data, and voice services for newly built residential areas, villas, and network reconstruction of old residential areas
FTTB access

The ONU is a downlink connected to the LAN switch in a tree structure.
LAN switches work independently without affecting each other.
Flexible allocate bandwidth according to the number of users under the LAN switch and the required bandwidth
Government and enterprise access
Provide symmetric/asymmetric dial-up or IP leased line access, meet high-bandwidth requirements, provide data, voice fax, and video
services.

Highlights

Compact and High

6U high, 2 MCCs, 7 service cards, 1 uplink card, available for mixed use of EPON/GPON/10G EPON/XGS-PON/XG(S)-PON
Combo service cards

Bandwidth

Up to 112 EPON interfaces, 112 GPON interfaces, 56 10G EPON interfaces, 112 XGS-PON interfaces, or 112 XG(S)-PON Combo interfaces.
Accessing broadband, voice, IPTV, and other services to meet various accessing applications of carriers and industry users.

Carrier-Grade

Type B single-homed/dual-homed trunk fiber protection, type C/D PON protection, meeting carrier-grade requirements
 MCU 1+1 protection, 1+1 power supplying, hot-swapping for all cards

Reliability

G.8032 Ethernet Ring Protection (10GE ring)

Abundant

VLAN, including selective QinQ, VLAN mapping and aggregation

Features

Complete QoS, including Dynamic Bandwidth Assignment (DBA), priority control, multiple traffic classification modes
and multiple queue scheduling modes, thus meeting different QoS requirements on VoIP, video, and Internet access
services
Complete ACL, including L2, L3, L4, and user-defined ACLs
Static multicast, IGMP Snooping, Proxy, MVR, and controllable multicast
IPv4 and IPv6 static route
Link aggregation, DHCP, interface isolation, and other common functions

Energy-Savi ng Design

Low power consumption design for the MCC and service cards, with overall power consumption less than 1600 W.
Adjusting the rotational speed according to temperature, prolonging fan life, reducing noise, and saving energy
Supports powering off the PON cards and uplink cards to save energy

Compact and High

6U high, 2 MCCs, 7 service cards, 1 uplink card, available for mixed use of EPON/GPON/10G EPON/XGS-PON/XG(S)-PON
Combo service cards

Bandwidth

Up to 112 EPON interfaces, 112 GPON interfaces, 56 10G EPON interfaces, 112 XGS-PON interfaces, or 112 XG(S)-PON Combo interfaces.
Accessing broadband, voice, IPTV, and other services to meet various accessing applications of carriers and industry users.

Carrier-Grade

Type B single-homed/dual-homed trunk fiber protection, type C/D PON protection, meeting carrier-grade requirements
 MCU 1+1 protection, 1+1 power supplying, hot-swapping for all cards

Reliability

G.8032 Ethernet Ring Protection (10GE ring)

Abundant

VLAN, including selective QinQ, VLAN mapping and aggregation

Features

Complete QoS, including Dynamic Bandwidth Assignment (DBA), priority control, multiple traffic classification modes
and multiple queue scheduling modes, thus meeting different QoS requirements on VoIP, video, and Internet access
services
Complete ACL, including L2, L3, L4, and user-defined ACLs
Static multicast, IGMP Snooping, Proxy, MVR, and controllable multicast
IPv4 and IPv6 static route
Link aggregation, DHCP, interface isolation, and other common functions

Energy-Savi ng Design

Low power consumption design for the MCC and service cards, with overall power consumption less than 1600 W.
Adjusting the rotational speed according to temperature, prolonging fan life, reducing noise, and saving energy
Supports powering off the PON cards and uplink cards to save energy

Supported Standards

IEEE802.3ah, 802.3av
ITU-T G.984, ITU-T G.9807
ETSI EN 300 019-1-1~3
IEC 60068-2
IEC 60721-2-6
IEC 60721-3-1~3
ETSI EN 300 753
NEBS GR-63-CORE ROHS
IEC 61000-4-2~6
IEC 61000-4-29
EN 61000-4-2~6
EN 61000-4-29
ETSI EN 300 386 V1.6.1
ETSI ES 201 468 V1.4.1
VCCI V-3 EN 55022
EN 55024 EN 55032
ITU-T K.20 CISPR 22
CISPR 24
ITU-T K.32
ITU-T K.44 FCC part 15
ICES-003
EN 60950-1
EN 60825-1~2
IEC 60825-1~2
IEC 60950-1
UL 60950-1
MIL-HDBK-217F
BELLCORE TR-332/SR-332

unnamed
Key Features >>

MAC  Static unicast and multicast mac address
Dynamic MAC address learning
Enabling/Disabling MAC address learning based on port
Showing, gather statistics about, clearing, and querying MAC addresses
MAC address limit based on port/LLID
MAC address tracking
VLAN  IEEE 802.3q VLAN
Access and trunk modes
Basic QinQ based on port
Configuring VLAN ACL rules
VLAN mapping based on egress/ingress port
1:1 VLAN mapping
N:1 VLAN mapping
VLAN mapping based on ACL
Route  Static ARP entries
Static route and default route
Route management
Multicast  IPv4/IPv6 multicast
IGMP Snooping and Proxy
MDL Snooping and Proxy
MVR
Dynamic controllable multicast
ACL ACL based on global configuration, ingress port, egress port, or VLAN
Link Aggregation  Support load balancing based on source MAC address, destination MAC address, source MAC address
+ destination MAC address, source IP address, destination IP address, or source IP address +
destination IP address.
Manual link aggregation
LACP

1+1 backup protection

QoS  Interface-based queue scheduling and rate limiting. Each interface supports 8 priority queues.
Support SP, WRR, WDRR, and SP+WRR queue scheduling modes
Trust CoS and DSCP priority. Support flexible mapping from CoS to queue and from DSCP to queue.
CoS (802.1p) priority remark
Configuring CoS or DSCP priority for packets that matching ACL rules
packet filtering, packet redirection, traffic mirroring, traffic statistics, traffic policing, interface queue
scheduling, interface rate limiting, priority policies, and VLAN modification policies based on traffic
rule
DHCP  DHCP Snooping
DHCP Relay
DHCP Option82
Interface Isolation  Interface isolation with one card or between different cards
Physical interface isolation of the same VLAN on one card or between different cards
Layer 2 isolation among different ONUs connected to the same PON port
Securit  IP Source guard
Dynamic ARP inspection
Anti-DoS attack
Storm control
Management  Login through Console, Telnet, or SSH, uniform NMS (SNMPv1/v2/v3)
Memory monitoring, CPU monitoring, and file system management

Specifications

Number of slots 13
Number of MCCs 2
Number of PON cards 7
Number of uplink cards 8. Slot 10 supports the 10GE card only.
PON interfaces 112*EPON, 112*GPON, 56*10GEPON,
112*XGS-PON, or 112*XG(S)-PON Combo
PON splitting ratio 1:64: EPON
1:128: GPON, 10G EPON, 10G GPON
Number of Fans 1
Power supply Dual DC power supplies, 1+1 redundancy
protection
Rated voltage: -48 V; voltage rage: -38.4 V
to -57.6 V
Dimensions 440mm (W) × 237 mm (D) × 266 mm (H)
(6U)
Environment Operating temperature: 0–45°C
Operating humidity: 10%–90% RH
(non-condensing)
Weight < 25 kg
Power Consumption < 1350 W

Ordering Information

GSM6860-10 6U chassis, with backplane installed, without the fan and power supply, 13 slots in total, 2 MCC slots (1–2), 7 service
slots 3–9, 1 fixed uplink slot (10), 2 slots for power supplies (11–12), and 1 fan slot
GSM6800-SMCA Master control and switching card (MCC), master/slave switching control
GSM6800-XP4A 10GE uplink or cascading card, 4*10GE SFP+ ports in 10GE mode or 4*GE SFP+ ports in GE mode, permanently in slot

10

GSM6800-XP2A 10GE uplink or cascading card, 2*10GE SFP+ ports in 10GE mode or 2*GE SFP+ ports in GE mode, permanently in slot
10
GSM6800-XP4L General 10GE uplink or cascading card, 4*10GE SFP+ ports in 10GE mode or 4*GE SFP+ ports in GE mode, available in
service slots 3–9 in mixed mode
GSM6800-GE16 GE uplink card, 16*GE optical SFP ports, available in service slots 3–9 in mixed mode
GSM6800-EP16 EPON service card, 16*EPON optical ports. The entire device can be configured with up to 7 cards of this type.
GSM6800-XEP8 10GEPON service card, 8*10GEPON SFP+ optical ports, supporting symmetric/asymmetric mode. The entire device
can be configured with up to 14 cards of this type.
GSM6800-GP16 GPON service card, 16*GPON optical ports. The entire device can be configured with up to 7 cards of this type.
GSM6800-XG16 XG(S)-PON service card, 16*XG(S)-PON optical ports. The entire device can be configured with up to 7 cards of this
type.
GSM6800-XC8A 8-way XG(S)-PON Combo service card. The entire device can be configured with up to 7 cards of this type.
GSM6800-XC16 16-way XG(S)-PON Combo service card. The entire device can be configured with up to 7 cards of this type.
GSFP+-XSN1DM-R XGS-PON OLT optical module (SFP+, commercial), XG-PON/XGS-PON, N1 standard
GSFP+-XSN2DM-R XGS-PON OLT optical module (SFP+, commercial), XG-PON/XGS-PON, N2 standard
GSFP+-XCN2DM-R XG-PON Combo OLT optical module (SFP+, commercial), GPON/XG-PON, N2 standard
GSFP+-XCD2DM-R XG-PON Combo OLT optical module (SFP+, commercial), GPON/XG-PON, D2 standard
GSFP+-XSCN2DM-R XGS-PON Combo OLT optical module (SFP+, commercial), GPON/XG-PON/XGS-PON, N2 standard
GSM6860-10-FANS381 Fan, intelligently adjusting the speed
GSD2151-48S48 -48 VDC power supply card, supporting undervoltage alarm, overvoltage alarm, input power supply fault alarm, fuse
fault alarm, providing 1 way of 48 v output power and 1 way of 5 v output power
GSA2162-S-220S54 Optional, 220 VAC to -48 VDC, single-module 1600-w embedded power system, equipped with 10-A and 16-A power
cables as standard configuration

Related products

OmantelProducts

Omantel Products

—Pngtree—black gold business card icon_5766239

4E1 + 4GE+30FXS/FXO fiber Multiplexer

GSM6800

GSM6800

GSI-820 Fiber Fusion Splicer

GSI-820 Fiber Fusion Splicer

PTP_LAN_Extension_Diagram_for_WWW_7111-1024x419

IpTL

4_E1_over_Ethernet_IP

4*E1 over Ethernet (IP) Desktop Type

GSI-NG PON SolutionsV4-1

GSI Pizza Box GPON OLT (GS- 57P08/16)

BSTU4

BSTU4 – Ethernet First Mile Termination Unit

acceed-family

Copper-pair bonding

images

Omantel Wholesale

—Pngtree—black gold business card icon_5766239

4E1 + 4GE+30FXS/FXO fiber Multiplexer

OmantelProducts

Omantel Products

GSI-820 Fiber Fusion Splicer

GSI-820 Fiber Fusion Splicer

BSTU4

BSTU4 – Ethernet First Mile Termination Unit

PTP_LAN_Extension_Diagram_for_WWW_7111-1024x419

IpTL

GSI-NG PON SolutionsV4-1

GSI Pizza Box GPON OLT (GS- 57P08/16)